- For deck height of 60" - Single wave - Molded polyethylene structural foam
Rave Slide
Ride the Rave! This tough double wall molded slide is the latest in sliding fun. - New version for 84" deck height! - Fits 18" opening - Available in a selection of colors
Color :
Qty:
Color :
Qty:
DOUBLE WALL WAVE SLIDE
- All Double Wall Wave Slides have molded-in foot
- For slide/deck mounting brackets and slide mounting kit hardware, see the Playground Hardware:Commercial Structure category (page 3)
- Use deck mounting brackets: L - #0020500, or Z (recommended) - #0020600
- Use slide foot #30008501 to secure base to ground
- 24" wide - 93" slide run
Color :
Qty:
- 26" wide - 107" slide run
Color :
Qty:
- 26" wide
- 128" slide run
- Requires mid-run support #3010851141 due to length of slide run
Color :
Qty:
Triple Rail Slide
- Molded-in slide foot
- Width 40"
- One side is a fun bump while the other is a deep scoop!
- Deck height 48" with a 96" slide run
- For slide mounting brackets and slide mounting kit hardware, see the Commercial:Hardware category
- The Alpine Thunder is 3 times more fabulous fun! THREE SLIDES IN ONE!
1. Double wave run
2. Deep fast luge run
3. Wild ride ridges run
- 72" deck height
- 120" run (horizontal distance from deck)
- Now sliding becomes a center for group play
- 62" wide double wall construction
- Installation requires two 0650015 slide feet
PlaysetParts.com is a division of Advertising & Design Services, Inc. (ADSi)
Office Hours: Mon - Wed 8 to 4, Thurs 10 to 4 (Pacific Time)
Toll-Free Order Line: 1.866.297.PLAY
| Office: 360.377.7529 | Fax: 360.626.0173
Mailing Address: PO Box 3026, Bremerton, WA 98310 USA
8 user(s) currently online.
2667 users in the past week.
Site designed, programmed, and maintained
by Advertising & Design Services, Inc.
Please email comments or suggestions to: webmaster@playsetparts.com or use our contact form. All content copyright 1999-2008 PlaysetParts.com, not to be used without written permission.
