Swing Hangers are used with any event that features a swinging motion. This includes, but is not limited to, belt and flat swings, trapezes, rings, gliders, tire swings, and more. They are that crucial component of any playstructure swing event that allows nearly friction-free motion.
- Commercial use
- Extra heavy duty with Rubber Boot which shields universal joint
- Complete with grease fittings for easy maintenance (one exterior and one under the rubber boot)
- Three point-mounting system reduces tangles and pinching
- Top plate included
- Mounting plate size: 5-1/2"x5-3/8"
- Bolts in 3-1/2" square pattern (center to center)
- Powder-coated to resist rust
- Load rating is 850 lbs.
- NOTE: The manufacturer recommends having a normally used swivel regreased every 20 days. However, for a heavily used one, regreasing more often would be required to maintain a low friction swivel environment. To maintain viability of the 12 month warranty on this item, you must maintain a grease maintenance log.
- Commercial use
- Heavy duty with Rubber Boot which shields universal joint
- Universal joint and grease fittings (one exterior and one under the rubber boot)
- Three point-mounting attachments reduces tangles
- Mounting plate size: 3"x5-7/8"
- Mounting holes separated by 4-1/2" (center to center)
- Powder-coated in Red or Brown to resist rust (no choice of color)
- Load rating is 850 lbs.
- NOTE: The manufacturer recommends having a normally used swivel regreased every 20 days. However, for a heavily used one, regreasing more often would be required to maintain a low friction swivel environment. To maintain viability of the 12 month warranty on this item, you must maintain a grease maintenance log.
Pipe Tire Swing Swivel
- Commercial use
- Extra heavy duty with Rubber Boot which shields universal joint
- Universal joint complete with grease fittings for easy maintenance (one exterior and one under the rubber boot)
- Three point-mounting attachments reduces tangles and pinching
- Available for 3 pipe sizes(outside diameters): 2-3/8", 3-1/2", 5"
- NOTE: The manufacturer recommends having a normally used swivel regreased every 20 days. However, for a heavily used one, regreasing more often would be required to maintain a low friction swivel environment.
- 5" version is not available as a "Quick Ship" item
A worn or cracked boot needs to be replaced to keep your tire swivel in good working condition.
- This replacement rubber boot fits the SH-01, SH-50, SH-51, and SH-29 tire swivels
PlaysetParts.com is a division of Advertising & Design Services, Inc. (ADSi)
Office Hours: Mon - Wed 8 to 4, Thurs 10 to 4 (Pacific Time)
Toll-Free Order Line: 1.866.297.PLAY
| Office: 360.377.7529 | Fax: 360.626.0173
Mailing Address: PO Box 3026, Bremerton, WA 98310 USA
9 user(s) currently online.
2561 users in the past week.
Site designed, programmed, and maintained
by Advertising & Design Services, Inc.
Please email comments or suggestions to: webmaster@playsetparts.com or use our contact form. All content copyright 1999-2008 PlaysetParts.com, not to be used without written permission.
